This Daka Furnace burns wood or coal to produce up to 125,000 BTU to heat your entire home or shop. Built to last, this furnace features a fire box constructed of 3/16in. thick steel plating, firebrick lining and a heavy-duty cast iron fire door with an easy-to-operate handle. Infinitely adjustable heat settings provide convenient heat control. The high-quality Dayton blower features a 1/10 HP permanent split capacitor motor and sealed ball bearings for trouble-free performance. A secondary heat chamber is controlled with a sliding baffle, increasing efficiency. There are also two 8in. warm air outlets on top of unit.
Features + Benefits
- Burns wood or coal
- Produces 62,500 to 125,000 BTU
- 3/16in. thick steel plating
- Firebrick lining
- Heavy-duty cast iron fire door with an easy-to-operate handle
- Infinitely adjustable heat settings
- High-quality Dayton blower with 1/10 HP permanent split capacitor motor and sealed ball bearings
- Secondary heat chamber
- Two 8in. warm air outlets on top
Whats Included
- (1) Furnace
- (1) Blower
- (15) Firebricks
- (1) Cast iron grate
- (1) Fan control
- (1) 4in. junction box with wiring for blower and fan control
- (1) Damper control
- (1) Cast iron fire door with gasket
- (1) Ash pan assembly with gasket
- (1) Instruction/assembly manual
Key Specs
Fuel Type |
Wood / coal |
Heating Capability (sq. ft.) |
3,000 |
Max. Log Size Accepted (L in.) |
25 |
BTU Output |
62,500 to 125,000 |
Blower Included |
Yes |
Blower Power Supply (Volts, Amps) |
115V, 1.85A |
Blower (CFM) |
550 |
Heat Settings |
Infinitely adjustable |
Full Load Run Time (Hours) |
10 |
Igniter |
None |
Thermostat Included |
Yes |
Door Opening W x H (in.) |
11 x 11 |
Firebox Size W x D (in.) |
16 x 26 |
Flue Collar Size (in.) |
6 |
Stove Pipe Included |
No |
Clearance from Side Wall (in.) |
18 |
Clearance from Rear Wall (in.) |
32 1/2 |
Clearance from Corner (in.) |
32 1/2 |
EPA Exempt |
Yes |
Dimensions W x D x H (in.) |
24 x 45 1/2 x 48 |
